VIP T04 Flex Durability Tester (4 station)
OVERVIEW
Equipment Summary:
The flex durability tester is used to measure the resistance against repetitive strain for films, composites and coating films, etc. Flex failure is determined by measuring the pinholes formed in the sample structure. It is also called Gelboflex.
The sample size (200 by 280mm) is attached to the flex tester mandrels. The flexing action consists of a twisting motion combined with a horizontal motion (compression), thus repeatedly twisting and crushing the film. The test set up gives a twisting motion of 440° in the first 90mm of the stroke and is followed by a straight horizontal motion of 65mm, the speed is 45 cycles/minute.
Application:
- PLC control and 7 inch touch screen operation
- 5 standard test modes and 4 test stations
- Long and short stroke fast switching
- Condition A,B,C,D and E can be chosen
- Micro printer (Optional)
| Flex Frequency | 45/minute |
|---|---|
| Flex Angle | 440° (90mm) or 400° (80mm) | >
| Horizontal Stroke | 155mm or 80mm |
| Stations | 4 |
| Sample Size | 280mm x 200mm |
