OVERVIEW
Equipment summary：
VEW 2302E Computer Servo Type Universal Testing Machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control, it also can be tested the constant-velocity loading, constant- velocity displacement. This machine is simple to operate, especially suitable for controlling quality in production line, this series of machine is mainly applied to test the non-metallic and metallic materials which the load is less than 30ton.
Main Function:
Mainly applied to test the metallic and non-metallic materials in tension, compression, bending, shear, peel, tear or two-points extensions and others., such as rubber, plastic, wire and cable, optical fiber and cable, safe belt, leather belt composite materials, plastic profiles, waterproof membrane, steel, copper, profiles, spring steel, bearing steel, stainless steel (as well as other high-hardness steel), castings, plate, strip, non-ferrous metal wire
Main feature:
Adopted photoelectric encoder to measure the displacement, the controller uses the embedded single-chip microcomputer structure with multi-function software, which combined with measurement, control, calculation and storage. It can automatic calculate the stress, rate of elongation (need to add with extensometers), tensile strength, elastic modulus, automated statistical results; automatically recorded the biggest point, breaking point, the designated point value or the rate of elongation; Using computer to display the dynamic curves in the testing process and process the data, After testing, it can re-analysis and editing the data by amplifying the curves through the graphics processing module, printing reports, product performance reached the international advanced level.
Corresponding standard:
《GB/T16491-1996 electronic universal testing machine》
Applicable industry：
It is widely used in controlling the quality; Rubber & Plastics; metallurgical iron and steel; manufacturing machinery; electronic equipment; automobile production; textile fiber; wire and cable; packaging materials and foodstuffs; instrumentation; medical equipment; civilian nuclear energy; civil aviation; colleges and universities; research Laboratory; inspection arbitration, technical supervision departments; building materials, ceramic; Petroleum & Chemical; other industries.
Technical Parameter
Maximum Load
300KN
Accurate Grade
1 grade
Effective Measuring Range
0.4%~100%(1 grade)
Measuring Accuracy
Display the value ±1%
Tester Resolution
Max load 1/200000, constant the resolution
Load Sensor
Basic Configuration: sensor(max load): one
Extended configuration: can add more sensors
Effective Testing Width
400 mm
Effective Tensile Stroke
800 mm (height can be increased according to the customer’s requirement)
Range of Testing Speed
0.5~80mm/min
Accuracy of Displacement Measurement
Tolerance: ±1%/ tolerance: ±0.2%
Deformation of Measured System (according to the requirements)
Min span: 10mm, Max range of deformation: 800mm
Extended deformation: Min span: 25mm, 50mm, 100mm, range of deformation: 5mm, 10mm, 25mm
Accuracy of Measured Deformation
Tolerance: ±1%
Safety
Electronic-limit protection
Testing Platform Moving Device
Fast/slow, two speeds to control, can jog
Back to Function of Testing Platform
Manual or automatic operation. After the test, the moving iron returns to the initial position with the highest speed by manual or automatic operation
Overload Protection
Overload 10%, automatic protection
Fixture
A set of tensile fixture; Round: 30mm; Flat: 25mm thickness
Machine Size
107*56*210cm (length*width*height)
Motor
Panasonic servo motor and drive
Power Supply
380V, 3 phase 50Hz
Power
5.5 KW (depends on which motor is used due to the different demand of force)
Weight
about 500 Kg
Measuring Unit
Interchangeable between Kg, N, lb, TON
