HZ-1713 PVC film lamination film plane plot
OVERVIEW
Equipment description:
HZ-1713 PVC film lamination film plane plot used to test plastic materials, PVC and other materials containing impurities, so as to determine its quality. The test material placed in the mold, through heat and pressure, the raw material shape. Will observe the drawer cast specimens placed on the glass surface fog, the light through from bottom to top, can clearly see the impurities in the specimen to determine the compound containing the impurity.
Technical parameter:
Model | HZ-1713 PVC film lamination film plane plot |
Capacity | 10T/20T/30T/50T |
Temperature range | Room temperature~300 Degree centigrade |
Temperature controller | LED display, set the input keys, numerical display (Taiwan original) |
Timer | LED display, time range 0.1S ~ 99min ~ 9.9hr |
Temperature control mode | P.I.D mode control |
Heater | Heated mold |
Heating time | Room temperature ~170 degree cemtigrade it will take 15min |
Thermal pressure plate | 300*300mm(Taiwan original) |
Cold pressure plate | 300*300mm |
Refrigeration system | All single-stage compressor sealed (Import) |
Cold media | Environmental friendly refrigerant |
Cooling | Chilled water circulation system |
Cooling temperature range | Room temperature~-5 Degree centigrade |
Hydraulic system | Closed loop proportional hydraulic flow control system, GPY oil pump drive with high-precision high-performance electro-hydraulic cylinder, the piston without resistance rate control mode execution, |
Cylinder stroke | Max 200mm |
Cylinder speed | 11mm/s |
Pressure table | 0~200kg/sq.cm |
Dimension | (W*D*H) 1000*500*1500 mm |
Power | AC380V,20A |
Weight | About 660kg |