CONTACT US
CONTACT

Our products

Electromechanical

Hydraulic

Testing Software

Abrasion & Pilling & Snagging

Color Machining & Color Fastness

Dye-ing & Finishing

Fiber & Yarn

Flammability

Geotextile

Physical & Mechanical

Sampling

Shrinkage

Strength & Fatigue

Boost Your Productivity with Premium Engineering Tools
Discover our top-selling testing machines and measurement tools
Browse Catalogue
VIT 175 - Standard Tumble Dryer for Textile Drying Process Testing
Whatsapp
Email

VIT 175 – Standard Tumble Dryer for Textile Drying Process Testing

[product_tags_no_comma_alt]
Request a quote
Whatsapp
Email

Application

The Standard Tumble Dryer is designed to test the drying process and procedures required for textiles, as prescribed in standard textile testing for household cleaning and drying. This dryer ensures compliance with various textile drying standards.

Features

  • Type: Front-loading, horizontal drum design for efficient drying.
  • Drum Diameter: 58cm ±1cm.
  • Drum Volume: 100L for ample space to accommodate fabric samples.
  • Revolution Speed: 50 r/min for consistent drying results.
  • Drying Capacity: Rated to handle up to 5 kg of fabric.
  • Lift Sheets: 3 pieces with a 120° spacing between each, ensuring even drying.
  • Controlled Air Outlet Temperature: Less than 80°C for safe and effective drying.
  • Power: 220 / 110 V 50/60 Hz, 3 kW

Testing Method

Application Scope
The Standard Tumble Dryer complies with the updated GB/T 8629-2017 standard, which replaced the previous GB/T 8629-2001. This new standard introduces additional washing programs and modifies drying conditions to ensure more accurate and reliable textile testing. Compared to the previous standard, the air outlet temperature during drying is now 10°C higher to improve the drying process.

Test Procedure

  1. Preheat: Weigh the dryer and record the data, then connect to the main power and preheat for 5 minutes.
  2. Weighing: Weigh the washed and dehydrated fabric sample and record the data.
  3. Loading: Estimate the drying time and load the sample into the drum. Close the door securely.
  4. Drying: Adjust the drying time, press the drying button, and allow the dryer to stop heating automatically in the last 20 minutes for cooling.
  5. Measurement: Once drying is complete, measure the mass of the fabric until the moisture content meets the standard requirements.
  6. Post-Test: Turn off the power, open the door, and remove the fabric sample.

Instructions

  1. Power Socket: Ensure an independent power socket is used, and the grounding cable is properly connected to earth for safety.
  2. Sample Preparation: Ensure the fabric is dehydrated with no water droplets before placing it into the tumble dryer to avoid damage to the machine.
  3. Safety: Never open the door during the test, as hot air could cause burns.
  4. Cleaning: After each test, clean the observing window and filter screen with a wet cloth to maintain optimal performance.

Specification

Standards
GB/T 8629, ISO 6330

Dimensions

  • Dryer Dimensions: 800 x 800 x 960mm (L x W x H)
  • Weight: 150 kg

Gallery

Coming Soon

Application

The Standard Tumble Dryer is designed to test the drying process and procedures required for textiles, as prescribed in standard textile testing for household cleaning and drying. This dryer ensures compliance with various textile drying standards.

Features

  • Type: Front-loading, horizontal drum design for efficient drying.
  • Drum Diameter: 58cm ±1cm.
  • Drum Volume: 100L for ample space to accommodate fabric samples.
  • Revolution Speed: 50 r/min for consistent drying results.
  • Drying Capacity: Rated to handle up to 5 kg of fabric.
  • Lift Sheets: 3 pieces with a 120° spacing between each, ensuring even drying.
  • Controlled Air Outlet Temperature: Less than 80°C for safe and effective drying.
  • Power: 220 / 110 V 50/60 Hz, 3 kW

Testing Method

Application Scope
The Standard Tumble Dryer complies with the updated GB/T 8629-2017 standard, which replaced the previous GB/T 8629-2001. This new standard introduces additional washing programs and modifies drying conditions to ensure more accurate and reliable textile testing. Compared to the previous standard, the air outlet temperature during drying is now 10°C higher to improve the drying process.

Test Procedure

  1. Preheat: Weigh the dryer and record the data, then connect to the main power and preheat for 5 minutes.
  2. Weighing: Weigh the washed and dehydrated fabric sample and record the data.
  3. Loading: Estimate the drying time and load the sample into the drum. Close the door securely.
  4. Drying: Adjust the drying time, press the drying button, and allow the dryer to stop heating automatically in the last 20 minutes for cooling.
  5. Measurement: Once drying is complete, measure the mass of the fabric until the moisture content meets the standard requirements.
  6. Post-Test: Turn off the power, open the door, and remove the fabric sample.

Instructions

  1. Power Socket: Ensure an independent power socket is used, and the grounding cable is properly connected to earth for safety.
  2. Sample Preparation: Ensure the fabric is dehydrated with no water droplets before placing it into the tumble dryer to avoid damage to the machine.
  3. Safety: Never open the door during the test, as hot air could cause burns.
  4. Cleaning: After each test, clean the observing window and filter screen with a wet cloth to maintain optimal performance.

Specification

Standards
GB/T 8629, ISO 6330

Dimensions

  • Dryer Dimensions: 800 x 800 x 960mm (L x W x H)
  • Weight: 150 kg

Gallery

Coming Soon

Save Big on High-Precision Tools!
Get up to 30% off on selected testing machines. Hurry, offer ends soon!
Browse Catalogue
Need Expert Advice?
Speak with our specialists to find the perfect engineering equipment for your needs.
Browse Catalogue

Related Products

Related products

  • Request For Quotation
Features
Our Location

Victor Equipments Resources Sdn Bhd
No. 29A, Jalan SS 15/4C,
47500 Subang Jaya,
Selangor. Malaysia.

Tel: +60​3​-​5621​5786
Fax: +60​3​-​5621​5829

Enquiry
Copyright 2025 © Victor Equipments Resources Sdn Bhd

Request a Quote or Further Information

Please fill in the request form below and one of our engineers will contact you to discuss your system requirements and if we can help, our typical response time is within 1 – 3 working day.

What you should know

Well, there's a few conditions that apply:

  • You agree NOT to pay us for this service.
  • You're comfortable with supplying us with relevant information in this form as well as other relevant information surrounding the request, for example; what you want, how many, delivery deadlines, restrictions on the location of the supplier, price targets etc.
  • We may only process requests where the email address submitted matches the company name. We may not respond to free email accounts such as Hotmail.
  • You agree that all information provided in this inquiry form represents yourself or an entity that you can speak for, that the information is accurate to the best of your knowledge and that if we determine that you have given false information we may choose not to proceed with this request.
  • You accept that, the operators of this site, cannot guarantee the suitability of any materials, equipment or services you may purchase from a supplier we've contacted on your behalf. You must check that out with the supplier.
  • We respect your privacy and only pass on the details contained in your request to appropriate suppliers in accordance to your inquiry. As we will share your information with related suppliers, we need your permission to do this by you clicking the submit button. We respect your privacy and promise you will only receive related information in accordance with testing and measuring instruments or equipment news and updates. You can unsubscribe from any of these services at any time by simply forwarding an email to [email protected].
  • We can't guarantee that the supplier will respond and if they don't, you agree you won't get angry with us. However, if you don't receive a response within 10 working days, please send us a follow-up message and we'll try and help further.