Application
Universal Wear Tester, to determine the wear and abrasion resistance of fabric used in clothing, footwear and industries, Universal wear tester supplies with surface abrasion head (inflated diaphragm method) and Flex abrasion head as well as necessary weights and blades. Accessories are available on request for conducting frosting, pilling and edge abrasion tests. Universal wear tester fitted with built-in timer and mechanical cycle counter; repeatable and reproducible testing is ensured by consistent motor speed providing 120 double strokes per minute of 25mm (1in) stroke length. Improved air injection system for more uniform inflation of the diaphragm used in surface abrasion testing, and a superior clamping mechanism for repeatable specimen tensioning.
Testing Method
Stoll quartermaster universal wear tester is mainly composed of control part and friction part. Install the sample on the fixture and tighten it. Put down the upper fixture with sand paper, adjust the position of weight to make the sand paper contact with the surface of the sample, and set the friction times of the sample by control system. Start the wear testing machine, test the friction, stop the instrument when the movement times reach the set value, and then take off the sample to observe the degree of wear.
Test Range of the Stoll Quartermaster This instrument can be used for abrasion resistance tests such as flat grinding, curved grinding, edge grinding, resistance to frost, etc. It can be used in woven fabrics, knitted fabrics, coated fabrics, pile fabrics, socks, felt, nonwovens, deep fabrics, yarns, wire rope watch film, rubber, leather, paper, and many other materials.
Stoll Quartermaster Abrasion Tester can test the wear resistance of different products or different friction ways which caused the different methods of operation. We will provide you with more detailed manual if you purchase our products. Rotation Speed 100rpm Measuring Range 25mm Counter Depth Abrasion kits Surface Abrasion kits Flex Abrasion kits
