CONTACT US
CONTACT

News & Events

ASTM D905 Test Standard for Shear Strength of Wood Adhesives | Victor Materials

ASTM D905 Test Standard for Shear Strength of Wood Adhesives | Victor Materials

Introduction to ASTM D905 Test Standard

ASTM D905 outlines a method for testing the shear strength of adhesives used in bonding wood and similar materials. This test is vital for ensuring adhesive quality and performance in various wood products.

Overview of ASTM D905 Test Standard

The standard involves a shear test using two bonded wood blocks. The specimen is tested under compressive loading to determine the adhesive’s bond strength.

Specimens for ASTM D905 Testing

  • Material: Wood
  • Specimen Type: Two wood blocks bonded with adhesive, offset by 1/4″ as per ASTM D905.

Grips for ASTM D905 Testing

  • Shear Test Fixture:
    Applies compressive loading to shear the blocks, testing the adhesive bond strength.
  • Recommended UTM:
    A UTM with a capacity of 5 kN to 600 kN is recommended for accurate results.

Test Procedure for ASTM D905

  1. Prepare the Specimen: Bond two wood blocks with adhesive, ensuring correct offset.
  2. Place Specimen in Shearing Tool: Align the specimen in the shear fixture.
  3. Apply Compressive Load: Apply the load at a constant rate of speed.
  4. Continue Loading: Monitor and record shear stress and failure load.

Key Measurement for ASTM D905 Testing

  • Shear Stress: Main measurement for adhesive bond strength.

Conclusion

ASTM D905 is essential for testing adhesive strength in wood products. Using the correct equipment ensures that adhesives meet performance standards for reliable, long-lasting bonds.

  • Request For Quotation
Features
Our Location

Victor Equipments Resources Sdn Bhd
No. 29A, Jalan SS 15/4C,
47500 Subang Jaya,
Selangor. Malaysia.

Tel: +60​3​-​5621​5786
Fax: +60​3​-​5621​5829

Enquiry
Copyright 2025 © Victor Equipments Resources Sdn Bhd

Request a Quote or Further Information

Please fill in the request form below and one of our engineers will contact you to discuss your system requirements and if we can help, our typical response time is within 1 – 3 working day.

What you should know

Well, there's a few conditions that apply:

  • You agree NOT to pay us for this service.
  • You're comfortable with supplying us with relevant information in this form as well as other relevant information surrounding the request, for example; what you want, how many, delivery deadlines, restrictions on the location of the supplier, price targets etc.
  • We may only process requests where the email address submitted matches the company name. We may not respond to free email accounts such as Hotmail.
  • You agree that all information provided in this inquiry form represents yourself or an entity that you can speak for, that the information is accurate to the best of your knowledge and that if we determine that you have given false information we may choose not to proceed with this request.
  • You accept that, the operators of this site, cannot guarantee the suitability of any materials, equipment or services you may purchase from a supplier we've contacted on your behalf. You must check that out with the supplier.
  • We respect your privacy and only pass on the details contained in your request to appropriate suppliers in accordance to your inquiry. As we will share your information with related suppliers, we need your permission to do this by you clicking the submit button. We respect your privacy and promise you will only receive related information in accordance with testing and measuring instruments or equipment news and updates. You can unsubscribe from any of these services at any time by simply forwarding an email to [email protected].
  • We can't guarantee that the supplier will respond and if they don't, you agree you won't get angry with us. However, if you don't receive a response within 10 working days, please send us a follow-up message and we'll try and help further.