HZ-7030 Tire-resistant hydraulic burst test machine
OVERVIEW
Equipment characteristics:
1.The core pressurization equipment selection of Shandong Province produced booster pump can be easily output pressure is adjustable, controllable.
2.Advanced technology, reasonable structure design. With small size, light weight and generous appearance.
3.All pressure parts are a standard part of the internationally renowned brand, no welded connections for easy removal, high safety factor, long life, easy to maintain.
4.Drive air pressure :0.1-0 .8Mpa; proportional to the output pressure and driving pressure.
5.Air consumption: 0.6-1Nm3/min
6.Stress test range:0—60Mpa, (based on actual customer demand, corresponding to the pressure.)
Technical parameters:
| Model | HZ-7030 Tire-resistant hydraulic burst test machine | ||||
| basic principles | Tire pressure, high-pressure pump high-pressure liquid pressure control system,transported by the high pressure hose to the sample, the tires for a long time hydrostatic testing and blasting. Record rupture pressure values. | ||||
| Performance parameters | standards | International standard | ISO 6803;ISO6772;ISO6802;SAEJ343 | ||
| Domestic standards | GB/T3683;GB/T7939;GB/T5568 | ||||
| Test pressure | 0~60MPa | ||||
| Controlling pressure accuracy | upper limit value of +2%, lower limit of -1% | ||||
| Test medium | Water | ||||
| Pressure control mode | Pressure-driven or hydraulic drive | ||||
| Mode of operation | Manual control | ||||
| Number of samples | Road 1 control test pressure and test time | ||||
| Temperature accuracy | difference:±1℃,max deviation:±2℃ | ||||
| Sample installation method | Manual clamping | ||||
| Structure and composition | Power system, circulatory system, the pressure control system, the workpiece device, manual control | ||||
| Scope of application | Tire and tube | ||||
Product performance parameters:
| Pressure trial medium | Water |
| Test pressure | Liquid up to 600 kg, arbitrary adjustable within this range can be achieved by regulating the compressed air drive pressure pressure regulation changes, different booster pump corresponding to the different pressure. |
| Data show | Accuracy:1Mpa |
| Pressure control | By controlling the drive gas pressure, the value of the low-end gas pressure can be high-end liquid pressure adjustment |
| Drive pressure range | 0.2Mpa-0.8Mpa，Air consumption 0.6-1 Cubic meters / minute钟 |
| Specimen installation | Manual |
| Pressure sampling frequency | 1 times/s |
| Alarm | You can set the alarm value, alarm set. And control system to shut down suppress. Into the packing state |
| Name | Quantity | Remarks |
| Booster pump | 1 | Max pressure: 300MP |
| High-pressure valve | 1 | Select high-pressure valve |
| Chassis | 1 | Spray |
| Pressure gauge | 1 | 300MpaShockproof pressure gauge |
| High pressure piping | 1 | Under high pressure piping |
| Air pressure gauge | 1 | Display driver gas pressure |
| Air pressure regulator | 1 | Adjust the drive gas pressure, thus regulating the high pressure fluid pressure conversion relationship: 400 × gas pressure = fluid pressure |
| Air cut-off valve | 1 | Close open air |
| Water tank | 1 | To conserve water |
| Level gauge | 1 | Observe the liquid position |
| Pressure sensor | 1 | Collecting pressure data |
| Digital display | 1 | Show pressure data accuracy 1Mpa,. With alarm function |
