OVERVIEW
Application
Hydrostatic Head Tester, used for determining accurately and swiftly the resistance of fabrics (coated, uncoated & non woven) and films to water penetration under pressure while firmly clamped in the test rig of standard area, by means of dynamic test method and static test method. The bank is linked to a test head to which the specimen is clamped quickly and stably by means of a hand wheel.
After starting the hydrostatic pressure test, the test pressure is automatically controlled; hydrostatic head test result is digitally displayed. The test specimen is observed visually for evidence of penetration by water. The test area is well illuminated and an unobstructed observation of the sample is from all sides greatly facilitates the visual drop detection. 100cm2 hydrostatic head is included.
Specifications
- 5 test methods are included.
- Pressure Range: 0 ~ 200kPa(2,000cmH2O, or 2 bar), 0 ~ 500kPa
- Holding force: 5,000N
- Increasing rate of water pressure: 1 ~ 30 kPa/min, or 1~100kPa/min (for the capacity of 500kPa)
- Accuracy: 0.2% F.S.
- Units: Pa, kPa, mmHg, cmH2O
- Specimen Holder: 100cm2 (7.8cm2 optional)
Standards AATCC 127, ISO 811/1420A, EN 20811, BS 3321, EN 1734-1996 JIS L1092 B-b, DIN53886, ERT 120-1/160-0, GB/T 4744, AFNOR GO7-057, EDANA WSP 80.6, ISO9073-16, GB/T24218.16
Power 220 /110 V 50/60 Hz 3 A
Weight 80 Kg
Dimensions 560x410x500 mm(LxWxH)
