OVERVIEW
Equipment description:
Foam indentation hardness tester is a requirement under the standard size foam sample to the provisions of the sag, measured compressive strength foam trap generated power, the ability to use Newton said it related to the performance and materials, and equipment the force imposed on the sample size of equal and opposite, record the force value, the indentation hardness can be measured.
To meet the standard:
The instrument is consistent with national standard GB10807-89 "soft foam polymeric materials indentation hardness test methods" requirements.
Main function:
1.Sag amount of pre-set, through precise control of timing circuit volume indentation, easy to use
2. High precision pressure sensors and large-scale integrated circuits, accurate determination of
3. Offers three methods of determination of indentation hardness
Technical parameter:
Model | VP 731 |
Range of indentation hardness : | 0~500KG |
Range of indentation hardness | 0-2000.0N |
Minimum resolution of force measurement | 0.2N |
Measurement error | <1% |
Stable pressure head | Speed:200mm/min |
Motor | Japanese Panasonic servo motor |
Upper compression plate size | 150*150mm |
Lower compression plate size | 400*400mm |